Hopper made of stainless steel (DIN 1.4301), observation flap in the rear door, integral water tank made of stainless steel (Material 1.4301 due to EN 10027-2).
Hopper capacity 3.4 - 5.5 m³, water tank capacity 740 - 1000 l.
Automatically lowering suction filter-grid, hydraulically operated hopper rear door, waste water drain unit on the sweeping container rear flap with coupling. Storz "B".
Rear chute under the flap.
Basic frame for ball and socket system of the Unimog including the storage for 4 support legs, for the easy dissembling of the sweeper
Heavy-duty suction fan, hydraulically driven by an axial-piston engine, air flow at full power max. 12,000 m³ and a vacuum of max. 1,200 mm water-column. Regulation of the suction power can be done over the Unimog hydraulic system control unit in the cab.
Sweeper Suction unit:
right-hand side mounted, with one disc brush 700 mm Ø, pneumatically lifting and swivelling, speed control from the control panel in the cab, ground pressure device operated from the frame, 550 mm wide suction hood, and suction hose 250 mm Ø, extension
roller brush 400 mm Ø 1,500 mm long, also with speed control and ground pressure device operated from the frame. Automatically rising of the suction units after shifting into reverse gear.
Spray-water unit with a hydraulically driven diaphragm pump, 50 l/min at max. 40 bar, with water filter, solenoid valves for the control of water supply, water nozzles in the suction hood, hose for filling the water tank and washing hose.
Hydraulic System: hydraulically solenoid valve block with overpressure security valves for the control of rear door of the waste container, water pump drive and all other necessary cylinders and oil flow regulators. The hydraulic circuit for the suction fan drive is an own separated circuit equipped with a special
flow-watcher and a dry-run protection system, to avoid too high rpm of the hydraulically engine during the sweeping process and to protect the suction fan drive from running dry, during the turning off period.
Pneumatic system with pistons for lowering and raising the sweeping unit, a pneumatic solenoid valve block for the control of all components.
Electrical system of the sweeper with a control panel in the cab, mounted onto the quick connection of the UNIMOG and a distribution box for the electrical system mounted on the attachment frame. Flashing beacon device on the back side of the
Accessories like support legs, mouning frame, diverse hoses, etc., are packed in a box 1450x1340x910mm
- Hopper in the standard -colour RAL 2011
- Frame and sweeping units galvanized.
Documentation is in german or english language available. Other languages against extra charge, on request.