Simple washing bars or complete washing vehicles are available as fixed or removeable structures for a wide variety of cleaning processes.
Whether for street washing or high-pressure cleaning – we build for any desired application.
Hydraulically extendable and controllable, with or without lifting device, different pumps, adapted to the needs.
Water tanks in cascade construction, as a box tank, in polypropylene or GRP, made of stainless steel or aluminum are adapted to the vehicle-related possibilities.
Various additional equipment such as side nozzles, hose reels mounted in front or rear are available.
The range of possible variations is large and can therefore be compiled according to the requirement profile.
Requires mandatory technical equipment!
Washing Bar
WBH 25 – 40
Hydraulically shift- and extendable
Lateral side impact shock absorber
Jet pipe and nozzles made of stainless steel
Guiding tube zinc coated
Exchangeable plastic sliding pulleys
Additional connection for extra work
Assambly takes place on the front mounting plate of the carrier vehicle
WBH 25
no lifting device
Suitable for mounting onto a small carrier vehicle
Washing width telescopeable
from 1400 to 2350mm
WBH 30
no lifting device
Attachable to carriers like AEBI, MULI, LINDNER, or similar
Washing width telescopeable
from 2000 to 3000mm
WBH 35
incl. lifting device
To be mounted onto Unimog
Washing width telescopeable
from 2000 to 3280mm
WBH 40
no / incl. lifting device
Suitable for HGV
Washing width telescopeable from 2500 to 3800m
WBT 25 – 40
Hydraulically shiftable
Lateral side impact shock absorber
Jet pipe and nozzles made of stainless steel
Additional connection for extra work
Assembly takes place on the front mounting plate of the carrier vehicle
WBT 25
no lifting device
Suitable for small carrier vehicle
Washing width 1350mmm
WBT 30
no / incl. lifting device
Attachable to carriers like AEBI, MULI, LINDNER or similar
Washing width 1800mm
WBT 35
incl. lifting device
To be mounted on Unimog or similar
Washing width 2200mm
WBT 40
incl. lifting device
Suitable on HGV
Washing width 2500mm
Washing Vehicles
WBH40 with 8800 l Cascadetank
Container-frame can be used on all loading-surfaces, RORO change-system
Additional equipment:
Hydraulically hose-reel, made of stainless steel, mounted on the rear, with 80 m 1“ hose,
active hose-guide and radio remote control
Medium-pressure tandem pump, 2 x 170 l at 50 bar
2 additional lateral frogmouth-nozzles
11000 l Plastic tank with
flushing system
Watertank with hooklift-system
Equipped with
Hydraulically driven floating-pump 1200 l/min at 15 bar and high-pressure pump 226 l/min at 138 bar,
frogmouth-nozzle unit mounted on the front-mounting plate,
pneum. swiveling nozzle bar WBT40 for the high-pressure cleaning below,
2 hydr. hose reels on the rear, each 40 m hose, 1 for high pressure, 1 for low pressure,
water-sprinkling device on the rear with approx. 300 l/min power, working wide approx. 4.0 m
Radio remote control
WBH25 with 2000 l PP-Watertank
Watertank mounted onto the ball-points of the vehicle
Equipped with
hose reel on the rear side,
additional lateral frogmouth-nozzle,
water-pump with a power of 150 l/min at 50 bar
Watertank-Systems
Depending on the customer´s wishes and possibilities, a corresponding tank-system is either directly mounted on the platform or on a frame. Container sizes vary and depend on the technical conditions of the vehicle.
